Skip to main content
Muffsy Phono Kits
Hifi Preamps for your Record Player

Build instructions for Previous Versions of the Muffsy Products

Here's where you find all the instructions for the previous versions of the Muffsy products.

Build Instructions: The Muffsy Phono Preamp PP-3 and PP-3 Rev A

Build Instructions: The Muffsy Hifi Dual Power Supply v2 and v3

Muffsy Phono Preamp Specifications:

Total Harmonic Distortion: 0.00081%
Total Harmonic Distortion + Noise: 0.01935%
Signal to Noise Ratio: 82.3 dB (0 dBV output)
Intermodulation Distortion: 0.0195% (ITU-R)

Crosstalk: -102 dB

Dynamic Range: > 110 dB (THD+N < 1%)

RIAA Compliance: +/- 0.15 dB (20-20.000 Hz)

RIAA Equalization: Passive

Gain at 1 kHz: 32-43 dB, in four steps

Input Impedance: 17k-150k ohm, in fifteen steps

Input Capacitance: Optional

PCB Size: 84 x 56 mm

Muffsy MC Head Amp Specifications:

Total Harmonic Distortion: < 0.1%

Total Harmonic Distortion + Noise: < 0.1%

Signal to Noise Ratio: 71.8 dB (rel to 0.5 mV input)

Intermodulation Distortion: 0.001% (ITU-R)

Dynamic Range: > 110 dB (rel to 0 dBV)

Frequency Response: +0 / -0.1 dB (20-20.000 Hz)

Gain: 24.6 dB

Input Impedance: 50-300 ohm, in four steps

PCB Size: 84 x 59.4 mm

Measurements at 1 kHz, 0 dBV output, if not stated otherwise

All content licensed under Creative Commons, except where specifically stated otherwise (more info)

Privacy Policy