Troubleshooting Assistance
You can also follow these tips for troubleshooting your Muffsy Phono Preamp, or this page if you have issues with hum.
You can also follow these tips for troubleshooting your Muffsy Phono Preamp, or this page if you have issues with hum.
Total Harmonic Distortion: 0.00081%
Total Harmonic Distortion + Noise: 0.01935%
Signal to Noise Ratio: 82.3 dB (0 dBV output)
Intermodulation Distortion: 0.0195% (ITU-R)
Crosstalk: -102 dB
Dynamic Range: > 110 dB (THD+N < 1%)
RIAA Compliance: +/- 0.15 dB (20-20.000 Hz)
RIAA Equalization: Passive
Gain at 1 kHz: 32-43 dB, in four steps
Input Impedance: 17k-150k ohm, in fifteen steps
Input Capacitance: Optional
PCB Size: 84 x 56 mm
Total Harmonic Distortion: < 0.1%
Total Harmonic Distortion + Noise: < 0.1%
Signal to Noise Ratio: 71.8 dB (rel to 0.5 mV input)
Intermodulation Distortion: 0.001% (ITU-R)
Dynamic Range: > 110 dB (rel to 0 dBV)
Frequency Response: +0 / -0.1 dB (20-20.000 Hz)
Gain: 24.6 dB
Input Impedance: 50-300 ohm, in four steps
PCB Size: 84 x 59.4 mm
Measurements at 1 kHz, 0 dBV output, if not stated otherwise
All content licensed under Creative Commons, except where specifically stated otherwise (more info)