A very simple, but useful PCB. A power supply for the Muffsy Relay Input Selector (or anything else that can be powered by 5V DC/1A):

The MeanWell IRM-05-5 takes an AC input between 85 and 265 volts, or a DC input between 120 and 370 volts and converts it to 5 volts DC at a maximum of 1 ampere.

This open source PCB project created in Eagle lets you add input and output cabling, as well as providing mounting holes for the PSU. Download it here:

Github repository for the Eagle project files

The project contains the schematic, the board, and the gerber files (and also the .cam file to generate your own gerbers).

While there are lots of quality kits for preamplifiers, I have never really found a decent way of adding more inputs to a preamp. The existing ones are either of dubious quality, spec'ed like a spaceship, or both.

So I decided to make my own input selector. With relays. And an ESP-32 module! A year, and four revisions later, you can buy it on Tindie for $69.

The entire project is fully open source, no strings attached.

So what is it?

It is a programmable input selector for preamplifiers, the size of a Post-IT note, with:

• Four stereo inputs
• One stereo output
• Mute
• Mains power on/off through a solid state relay control
• Break-outs for all ESP-32 pins

It's controlled by a rotational encoder and IR remote, and you get the great build instructions that you've come to expect from a Muffsy kit.

The PCB, all onboard components, ESP-32, rotational encoder and IR receiver are all included in the kit. You also get the fully functional software for it, as well as the Eagle project files for the PCB.

The benefit of using an ESP-32 is that you can program it yourself, and use other functions like touch sensors, Wifi and Bluetooth.

I'd really like a stereo input selector with relays, but those things are hard to find! (Apart from some of dubious quality on the *Bay)

Better make my own then. This one's got a custom footprint for an ESP32 devkit module, but it can also be controlled with a rotary switch.

I decided to use five Panasonic TQ-2 relays. The ESP32 module and relays are powered separately, power ground and signal ground are separated to avoid injecting any clicks, pops or noise into the audio channels.

The whole project is open source, free to use as you wish. Eagle project files, gerbers, the Eagle library for the ESP32 module and BoM are all available on the hackaday.io project page.

And, wouldn't you know, Hackaday presented this little side project on their blog!